2.25" T-304 Stainless U-Bolt/ Saddle Clamp part # 18225
| Part# |
|---|
| 18225 |
Use where a good quality U-Bolt/ Saddle Clamp is required. T-304 Stainless steel will never rust. 5/16" U-Bolt w/standard nut, uses 9/16" socket. Saddle with reinforced ribs & round holes. Natural Mill finish. Can be brushed or polished prior to installation. It is recommended that hand tools be used to install these clamps. Power assisted wrenches may damage them.
Own this BORLA product and have questions or need support?
Click Here or Call 1-877-462-6752
Click Here or Call 1-877-462-6752
Click on any image above to enlarge.
Vehicle(s) shown may vary from your specific model.
Note: Products are shipped un-polished unless otherwise indicated. Image shown may be a polished version. Tip style may vary.
- Related BORLA Products
-
21461
BORLA® Stainless Steel Exhaust Cleaner & Polish. part # 21461
-
18003
2.25” T-304 Stainless Steel Dynaflex® Tru-Seal® Band Clamp (Flat Style) part # 18003
-
18007
2.25" T-304 Stainless Steel V-Band Clamp. part # 18007
-
18322
2.25" T-304 Stainless Steel AccuSeal® Clamp part # 18322
-
30325
2.25" OD x 5' Long T-304 Stainless Steel Straight Tubing. part # 30325
-
60578
2.25" T-304 Stainless Steel Pipe/ Tube Bracket Kit (2 pieces) part # 60578
-
60581
CrateMuffler® Endplate Bracket Kit. Bolts To Endplate Of CrateMuffler. Hanger Can Be Welded To Bracket. part # 60581
-
60582
Hanger/ Isolator Kit. Contains Enough Components To Fabricate 2 Hangers. part # 60582