Part #140234
2005-2008 Porsche 911 Cat-Back Exhaust System S-Type Part # 140234
Porsche 997 gets quality BORLA® Performance Cat-Back™ system. The BORLA® love affair with the Porsche goes back many decades. Alex Borla began his racing career driving endurance Porsches in Europe. The BORLA® Cat-Back™ systems for the 997 model of the revered 911 Carrera S series is a perfect blend of exceptional performance and that exclusive BORLA® tone. PN140234 Cat-Back™ features a full dual system which, thanks to the lightweight high quality T-304 austenitic stainless steel construction, is actually more than 10% lighter than the factory single muffler system. This 2-¼” system is tuned for the non-turbo Boxster engine, boasting an impressive 325cfm greater air flow while generating solid double-digit horsepower numbers and torque gain numbers in the mid-twenties. The 140234 system features four 3.5” Intercooled, mirror polished T-304 stainless steel tips. The BORLA® PN140233 Cat-Back™ system is similar, but features the 88mm round polished T-304 stainless steel angle cut tips (two per side).
BORLA®, the original pioneers of high quality, T-304 austenitic stainless steel (superior to 409 or aluminized steel) free-flow exhaust utilizes patented award and race winning technology to deliver quality, sound, performance gains and enhanced fuel economy -- all with an easy bolt-on installation. And backed by an unsurpassed written Million-Mile warranty.
Warranty Valve Note: BORLA only warranties moving parts, such as valves and actuators for one year. This system includes functioning active exhaust valves, similar to those in the stock exhaust, and is recommended for most customers. Active exhaust valves in this system will improve sound quality.
Warranty Valve Simulator Note: BORLA only warranties moving parts, such as valves and actuators for one year. This system includes active exhaust valve simulators and is recommended for cars with significant modifications. The active exhaust valves in the stock exhaust have been removed, valve simulator mounts on the outside of the pipe allow the stock valve motors to be re-attached to prevent an error code.
Warranty Finish Note: BORLA exhaust systems are covered under our Million-Mile warranty with the following exceptions. Borla will warranty black coatings, tip finishes, and carbon fiber parts for one year.
WARNING: This product in the physical form it is sold does not present a hazard. However, operations including, but not limited to welding, brazing, or thermal cutting can expose you to chemicals including Chromium, Nickel, Cobalt, Arsenic, Cadmium and Lead which are known to the State Of California to cause cancer, birth defects and other reproductive harm. For more information go to
www.P65Warnings.ca.gov
Related Borla Products
BORLA EXHAUST CLEANER/POLISH
Part# 21461
["3.6L"]
["911"]
["Porsche"]
["Coupe"]
["997"]
Polished
N
SLE
["2005","2006","2007","2008"]
6"
SLE
1.75"
N
N
CATALOG
47
A-35381.pdf
06
2005-2008
36
S-Type
911
F
3.5"
Porsche
2005 2006 2007 2008
2005-2008 Porsche 997 Non-Turbo 3.6L 6 Cyl. Automatic/ Manual Transmission Rear Wheel Drive 2 Door.
27x15x27
Round
Dual Round Rolled Angle-Cut
2.25", 1.75"
SS-Exhaust.com17268TURN14140234https://www.ss-exhaust.com/borla-140234/ssexhaust_logo.pngParts Via22613PARTSVIA140234https://borla.partsvia.com/b2c/cart/addAndCheckout/BOR140234/1partsvia_logo.png
0.00
Cat-Back & Axle-Back Exhaust
Cat-Back Exhaust System
0
3600
Coupe
Coupe
997
RWD
3.6L
3600
Porsche
911
N
N
25
Y
[{"Type":"main","FileName":"140234-main-1-large.jpg"},{"Type":"main","FileName":"140234-main-1-medium.jpg"},{"Type":"main","FileName":"140234-main-1-thumb.jpg"},{"Type":"main","FileName":"140234-main-1-xlarge.jpg"},{"Type":"vehicle","FileName":"140234-vehicle-1-large.jpg"},{"Type":"vehicle","FileName":"140234-vehicle-1-medium.jpg"},{"Type":"vehicle","FileName":"140234-vehicle-1-thumb.jpg"},{"Type":"vehicle","FileName":"140234-vehicle-1-xlarge.jpg"}]
Dual Split Rear Exit
