Part #40976 Lead The Heard

XR-1 Raceline - Shorty Collector Part # 40976

XR1 COL/MUF SHTY 2-1/4IN 4OUT 40976
BUY DIRECT MSRP: $764.99

4) 2.25" I.D. Inlets 1) 4" O.D. Outlet .This is the HOT set up in drag racing. This patented, award and race-winning vacuum Wave Collector was designed to replace your current open header collector and serves as a power producing merge collector and muffler -- all in a single unit. The technology in this unit results in pulling air through the engine faster, which creates more power.

When an exhaust valve opens, an energy wave is created from the expanding combustion gases. When this wave encounters a lower pressure area such as a larger collector pipe or the atmosphere, a reversion wave is reflected back toward the exhaust valve. BORLA®‘s Vacuum Wave Collector Muffler ensures this wave‘s "anti-node" reaches the exhaust valve at the precise time for its lower pressure to help fill the combustion chamber with a fresh charge and to further extract spent gases from the chamber via a vacuum effect.

Made with the same patented, award and race winning flow through design as the Standard XR-1® Collector Muffler. This muffler, however, is designed for door car applications where a Standard size Collector Muffler is too large. This muffler is recommended for Full Chassied Cars. Accepted in NHRA, IHRA, Hot Rod Series, Brackets, Super Chevy, and NSCA. Can also be used on other vehicles.

Recommend for high horsepower applications. T-304 Stainless steel will never rust. 100% welded construction for strength. T-304 stainless steel wool for sound control.

Best of all, it's made in the USA. Just what you'd expect from the world‘s most experienced (and most winning) exhaust brand.

Warranty Valve Note: BORLA only warranties moving parts, such as valves and actuators for one year. This system includes functioning active exhaust valves, similar to those in the stock exhaust, and is recommended for most customers. Active exhaust valves in this system will improve sound quality.
Warranty Valve Simulator Note: BORLA only warranties moving parts, such as valves and actuators for one year. This system includes active exhaust valve simulators and is recommended for cars with significant modifications. The active exhaust valves in the stock exhaust have been removed, valve simulator mounts on the outside of the pipe allow the stock valve motors to be re-attached to prevent an error code.
Warranty Finish Note: BORLA exhaust systems are covered under our Million-Mile warranty with the following exceptions. Borla will warranty black coatings, tip finishes, and carbon fiber parts for one year.
WARNING: This product in the physical form it is sold does not present a hazard. However, operations including, but not limited to welding, brazing, or thermal cutting can expose you to chemicals including Chromium, Nickel, Cobalt, Arsenic, Cadmium and Lead which are known to the State Of California to cause cancer, birth defects and other reproductive harm. For more information go to www.P65Warnings.ca.gov
? ? ? ?