This website uses cookies to ensure you get the best experience on our website. Learn more.
Chevrolet Corvette Exhaust Systems
Proud Corvette owners know what first made them a devoted fan. What was it for you? Was it the Corvette’s sculpted lines; it’s ability to hit 60 mph in just 3.8 seconds; or its legendary appeal? One thing is sure, you and other Corvette owners are not like everyone else- and you know your pride and joy isn’t any ordinary vehicle either.
That’s why so many Corvette owners choose to install a BORLA Corvette exhaust system on their C4, C5, C6, or C7. They not only want their vehicle to look good and perform well on the road, but they also want it to sound just right. The right sound velocity and high frequency comes with one of our three Corvette exhaust systems: Touring, S-Type or ATAK ®.
Designed to Last: Corvette Exhaust Systems
Choose BORLA for an excellent sound and amazing durability. Owners choose our systems because they are so long lasting. The system is made with aircraft grade T-304 austenitic stainless steel and is designed specifically to each vehicle. This is all backed by a million mile warranty. If you are interested in enhanced sound and performance for street driving or racing- you can’t go wrong with BORLA.
Please select your model below:
C7 Exhaust
C6 Exhaust
C5 Exhaust
C4 Exhaust
Corvette
(7)
Select
Select
Select
Select
Select
Select
Select
Axle-Back Exhaust System
Part# 11376 What vehicle does this fit?
Sound Level:
Length:
6.75"
Engines:
5.7L
Body:
Coupe, Convertible
Drive:
RWD
Pipe Diameter:
2.5"
Tip Size:
3.38" x 3"
Exit:
Dual Split Rear Exit
- This system increases the Axle-Back section diameter from the stock 2.25", to 2.5"
- Modification to Original Equipment mid-pipe REQUIRED for installation
- Stock mid-pipe outlets MUST be expanded to 2.5” during installation
Price:
$1,418.99
Axle-Back Exhaust System
Part# 11811 What vehicle does this fit?
Sound Level:
Length:
7"
Engines:
6.2L
Body:
Coupe, Convertible
Drive:
RWD
Pipe Diameter:
Single 2.5" Into Muffler, Dual 2" Out"
Tip Size:
4"
Exit:
Dual Split Rear Exit
- S-Type II sound level
- System will fit vehicles with and without NPP valves
- BORLA® system does NOT contain NPP valves
Price:
$1,655.99
Axle-Back Exhaust System
Part# 11812 What vehicle does this fit?
Sound Level:
Length:
7"
Engines:
6.2L
Body:
Coupe, Convertible
Drive:
RWD
Pipe Diameter:
Single 2.5" Into Muffler, Dual 2" Out
Tip Size:
4"
Exit:
Dual Split Rear Exit
- System will fit vehicles with and without NPP
- BORLA® system does NOT include NPP valves
Price:
$1,720.99
Cat-Back Exhaust System
Part# 140082 What vehicle does this fit?
Sound Level:
Length:
5.63"
Engines:
5.7L
Body:
Coupe, Convertible
Drive:
RWD
Pipe Diameter:
Single 3" Into Dual 2.5"
Tip Size:
6.69" x 3"
Exit:
Single Split Rear Exit
- Except ZR1 models
- 3" Inlet diameter into dual 2.5"
Price:
$1,035.99
Cat-Back Exhaust System
Part# 140414 What vehicle does this fit?
Sound Level:
Length:
7"
Engines:
6.2L
Body:
Coupe, Convertible
Drive:
RWD
Pipe Diameter:
Single 2.5" Into Muffler, Exiting Dual 2"
Tip Size:
4"
Exit:
Dual Split Rear Exit
- System will fit vehicles with and without NPP
- BORLA® system does NOT include NPP valves
- System contains a Merge X-Pipe
- System ships in 2 boxes
Price:
$2,198.99
Cat-Back Exhaust System
Part# 140440 What vehicle does this fit?
Sound Level:
Length:
7"
Engines:
6.2L
Body:
Coupe, Convertible
Drive:
RWD
Pipe Diameter:
Single 2.5" Into Muffler, Exiting Dual 2"
Tip Size:
4"
Exit:
Dual Split Rear Exit
- S-Type II sound level
- System will fit vehicles with and without NPP
- BORLA® system does NOT include NPP valves
- System contains a Merge X-Pipe
Price:
$2,465.99
Cat-Back Exhaust System
Part# 14385 What vehicle does this fit?
Sound Level:
Length:
5.75"
Engines:
5.7L
Body:
Coupe, Convertible
Drive:
RWD
Pipe Diameter:
2.5"
Tip Size:
7.25" x 2.4"
Exit:
Single Split Rear Exit
Price:
$2,481.99
Shop By
Refine these results:
