Part #18330
Accessory Part # 18330
AccuSeal® clamp design provides 360 degrees of clamping force in a clean, easy to install, one bolt part. Use in applications where the clamping pressure needs to be spread over a wider surface than a traditional U-Bolt / Saddle Clamp provides. The design allows connections to easily be disassembled. Made from T-304 Stainless steel for sharp appearance and long life. The 1.25" wide band is a natural mill finish that can be brushed or polished prior to installation.
Warranty Valve Note: BORLA only warranties moving parts, such as valves and actuators for one year. This system includes functioning active exhaust valves, similar to those in the stock exhaust, and is recommended for most customers. Active exhaust valves in this system will improve sound quality.
Warranty Valve Simulator Note: BORLA only warranties moving parts, such as valves and actuators for one year. This system includes active exhaust valve simulators and is recommended for cars with significant modifications. The active exhaust valves in the stock exhaust have been removed, valve simulator mounts on the outside of the pipe allow the stock valve motors to be re-attached to prevent an error code.
Warranty Finish Note: BORLA exhaust systems are covered under our Million-Mile warranty with the following exceptions. Borla will warranty black coatings, tip finishes, and carbon fiber parts for one year.
WARNING: This product in the physical form it is sold does not present a hazard. However, operations including, but not limited to welding, brazing, or thermal cutting can expose you to chemicals including Chromium, Nickel, Cobalt, Arsenic, Cadmium and Lead which are known to the State Of California to cause cancer, birth defects and other reproductive harm. For more information go to
www.P65Warnings.ca.gov
Related Borla Products
BORLA EXHAUST CLEANER/POLISH
Part# 21461
CLAMP T-304 BAND 3"
Part# 18006
CLAMP V-BAND 3" T304SS 3 PCS.:
Part# 18009
CLAMP T-304 SADDLE 3"
Part# 18300
UNIVERSAL BEND 3" DIA 45° T-30
Part# 19002
UNIVERSAL BEND 3" DIA 90° T-30
Part# 19003
U-BEND: Ø3.0" X 5" RADIUS X 8"
Part# 19230
TIP 3-1/2, 3X9 S RD AC IC
Part# 20122
TIP 3, 3X9 S RD TD/TO-
Part# 20140
TIP: 3" INLET, 4" DIA. ROUND R
Part# 20246
TIP: 3" INLET, 4.25" RD ROLLED
Part# 20251
TUBING SS 3"X5'
Part# 30330
TUBE BRACKET KIT 3.0"
Part# 60580
CrateMuffler®, ENDPLATE BRACKE
Part# 60581
HANGER/ISOLATOR KIT 8 PIECE
Part# 60582
UNIV HOT ROD KIT 3.0" PIPES
Part# 60592
GCHER TRACKHAWK '18-'21 6.2L V
Part# 60672BC
GCHER TRACKHAWK '18-'21 6.2L V
Part# 60673CF
N
MTHSA
["0"]
MTHSA
N
N
CATALOG
0
1
F
0
3" T-304 Stainless Steel AccuSeal® Single Bolt Band Clamp.
3x6x7
JEGS High Performance
61
JEGAUTO
18330
https://www.jegs.com/i/Borla/157/18330/10002/-1
jegs_logo.png
Summit Racing Equipment
1811
ATEMOTO
ATEMOT2
18330
https://www.summitracing.com/parts/bor-18330
summitracing_logo.png
Northern Performance
30688
MARAUTO
18330
https://www.northernperformance.ca/part/Borla/Exhaust+Clamp/18330
northern-performance_logo.jpg
4 Wheel Parts
21152
FOWHEEL
18330
https://www.4wheelparts.com/p/borla-accuseal-stainless-single-bolt-band-clamp-18330/_/R-BDLS-18330
4wheel-parts_logo.jpg
0.00
Accessories
ACCUSEAL-C
Accessory
0
N
N
0
N
[{"Type":"main","FileName":"18330-main-1-large.jpg"},{"Type":"main","FileName":"18330-main-1-medium.jpg"},{"Type":"main","FileName":"18330-main-1-thumb.jpg"},{"Type":"main","FileName":"18330-main-1-xlarge.jpg"}]
[{"Type":"Feature","Title":"Used on slip joint connections - connect O.D. pipe to I.D. pipe or I.D. muffler","Description":""},{"Type":"Feature","Title":"Allows connection to be easily disassembled if needed","Description":""},{"Type":"Feature","Title":"1.25\" wide band","Description":""},{"Type":"Feature","Title":"Natural mill finish can be brushed or polished prior to installation","Description":""},{"Type":"Feature","Title":"See below for additional Product Features & Benefits","Description":""}]