This website uses cookies to ensure you get the best experience on our website. Learn more.
Part
#140052
1999-2004 Ford Mustang Cobra Cat-Back Exhaust System S-Type Part # 140052
Tips:
Single Round Rolled Angle-Cut
CHANGE
Fits these Vehicles:
1999-2004 Ford Mustang Cobra 4.6L V8 Supercharged Manual Transmission Rear Wheel Drive 2 Door Coupe (with Independent Rear Suspension)
Select a dealer below to buy now
Ford has raised the performance bar with the 1999-04 Supercharged 390-horsepower Mustang Cobra. And BORLA® Performance Industries, chosen by Ford SVT as the factory exhaust on the last Mustang Cobra R, has updated it further with a high tech, custom tuned exhaust featuring bright chrome on T-304 stainless steel tips.
BORLA® Engineers massaged and balanced the complete system based on the Ford ECU Strategy that allows the engine to breath free without interrupting the careful balance of on-board engine management.
The Cat-Back™ system (PN 140052) is full dual with 2.5" aerospace grade high-quality T-304 austenitic stainless steel mandrel bends and generates a straight-through performance based exhaust flow that not only brings the best out of the Cobra Mustang but also gives that extra capacity for additional aftermarket performance upgrades down the road.
Make no mistake, this is an aggressive system and proclaims pure power. We also offer a more BORLA® traditional system based on the Cobra R system (PN 14858) that is less aggressive but with identical performance gains.
BORLA® Performance Industries, the original pioneers of high-quality T-304 austenitic stainless steel (superior to T-409 or aluminized steel) free flow exhaust utilizes its patented award and race winning technology to deliver quality, sound, performance gains and enhanced fuel economy – all with an easy bolt-on installation. All BORLA® street products carry the famous BORLA® written million-mile warranty.
WARNING:
This product in the physical form it is sold does not present a hazard. However, operations including, but not limited to welding, brazing, or thermal cutting can expose you to chemicals including Chromium, Nickel, Cobalt, Arsenic, Cadmium and Lead which are known to the State Of California to cause cancer, birth defects and other reproductive harm. For more information go to www.P65Warnings.ca.gov
Available for this vehicle
Technical Specs
Installation Instructions
Shipping Info
| Pipe Diameter | Tip Size | Tip Exit |
|---|---|---|
| 2.5" | 4" | Single Split Rear Exit |
| Boxed Weight | Box Size |
|---|---|
| 45.0 | 45 x 11 x 26 |
Related Borla Products
Check items to add to the cart or
-
1999-2004 Ford Mustang Cobra Cat-Back Exhaust System Part # 140446
Part# 140446
Sound Level:
Drive: RWDPipe Diameter: 2.25" into 2.5" Tip Size: 4" Exit: -
