This website uses cookies to ensure you get the best experience on our website. Learn more.
Connecting Pipe
Part# 60513 What vehicle does this fit?
Part# 60087 What vehicle does this fit?
- Merge X-Pipe
Part# 60089 What vehicle does this fit?
- This X-Pipe and connection pipe will fit vehicles with and without NPP valves
Part# 60512 What vehicle does this fit?
- Use with select BORLA® Axle-Back or GM Performance Rear Mufflers to create a Cat-Back™ system
- Contains a Merge X-Pipe
Part# 60521 What vehicle does this fit?
- Use with a BORLA® X-Pipe and select BORLA® Axle-Back systems to create a Cat-Back® system
Part# 60548 What vehicle does this fit?
- Fits models With or WITHOUT NPP Valves
- This is a Merge X-Pipe
Part# 60554 What vehicle does this fit?
- Used to adapt Crew Cab with Short Bed systems to Crew Cab with Std. Bed (6' 7") 156.5" WB vehicles
- 3" ID inlet, 3" OD outlet, 11" long
- Includes 1) 3" clamp
Part# 60556 What vehicle does this fit?
- EXCEPT Raptor, Tremor, and Black Appearance Package
- For use on Crew Cab with Standard Bed (6' 7") 156.8" or 157.2" Wheelbase vehicles
- 3" ID inlet, 3" OD outlet, 15" long
- 1) 3" clamp included
Part# 60561 What vehicle does this fit?
- Does NOT fit Competitors or Original Equipment systems
- Resonator contains an internal H-Pipe
Part# 60564 What vehicle does this fit?
- EXCEPT 3.5L V6 PowerBoost, Raptor, Tremor, and Black Appearance Package
- For use on Extended Cab with Long Bed (8' 2") 163.7" or 164.1" Wheelbase vehicles
- 3" ID inlet, 3" OD outlet, 21" long
- 1) 3" clamp included
Part# 60593 What vehicle does this fit?
- For use on Crew (Double) Cab with Long Bed (6' 1") 140.6" Wheelbase models
- 2.5" ID inlet, 2.5" OD outlet, 16.63" long
- 1) 2.5" clamp included
Part# 60595 What vehicle does this fit?
- Fits JK & JKU models
- Installation REQUIRES cutting the Original Equipment system
- The 60595 Loop Delete Y-Pipe provides more space underneath your Wrangler JK/ JKU
Part# 60605 What vehicle does this fit?
- Used to add the Dual Mode Exhaust (NPP) valves to select Borla® systems that did not have NPP valves
- These pipes can ONLY be used with BORLA® mufflers that have dual outlets on each end of the muffler
- Vehicle MUST Have Had NPP System As O.E. Equipment To Use The Adapters
Part# 60607 What vehicle does this fit?
- EXCEPT Convertibles
- For use with BORLA® mufflers ONLY
- This part ELIMINATES the AFM valves
- This part contains a Merge X-Pipe
Part# 60608 What vehicle does this fit?
- This resonator can be added to select BORLA® Camaro SS systems for additional sound control
- Does NOT fit competitors or Original Equipment systems
Part# 60610 What vehicle does this fit?
- EXCEPT Convertibles
- This pipe includes AFM valves
- For use with BORLA® mufflers only
- Pipe includes a Merge X-Pipe
Part# 60622 What vehicle does this fit?
- Adding this Mid-Pipe & reverse Y-Pipe to a BORLA® Axle-Back system will create a Cat-Back™ system
- 3" diameter front pipes into reverse Y-pipe with dual 2.25" outlets
- NOT intended for use with O.E. mufflers
Part# 60624 What vehicle does this fit?
- Add this Resonator to Axle-Back system 11933 and 60622 Mid-Pipe to attain the Touring sound level
- Add this Resonator to Axle-Back system 11934 to make a quieter version of the ATAK® system
- 3" diameter system
Part# 60634 What vehicle does this fit?
- Does NOT fit Competitors or Original Equipment systems
- Use these Mufflers to convert a 140633 or 140633CB ATAK® system to a S-Type system
Part# 60635 What vehicle does this fit?
- Does NOT fit Competitors or Original Equipment systems
- Use these Mufflers to convert a 140632 or 140632CB S-Type system to an ATAK® system
Part# 60637 What vehicle does this fit?
- Mid-Section includes a Merge X-Pipe
- Add BORLA® front Connecting Pipe / Resonator 60650 for additional sound attenuation
- Use with BORLA® Tailpipes 60640, 60640BC and 60640CFBA or O.E. Tailpipes
Part# 60638 What vehicle does this fit?
- Mid-Section includes a Merge X-Pipe
- Add BORLA® front Connecting Pipe / Resonator 60650 for additional sound attenuation
- Use with BORLA® Tailpipes 60640, 60640BC and 60640CFBA, or O.E. Tailpipes
Part# 60640 What vehicle does this fit?
- Use with O.E. Mid-Sections or BORLA® Mid-Sections 60637, 60638, 60731, or 60732
Part# 60640BC What vehicle does this fit?
- Use with O.E. Mid-Sections or BORLA® Mid-Sections 60637, 60638, 60731, or 60732
Part# 60640CFBA What vehicle does this fit?
- Use with O.E. Mid-Sections or BORLA® Mid-Sections 60637, 60638, 60731, or 60732
Part# 60650 What vehicle does this fit?
- Use with BORLA® mufflers 60637 or 60638 to provide additional sound attenuation.
- Works with BORLA® Tailpipes 60640, 60640BC, and 60640CFBA or O.E. Tailpipes
Part# 60661 What vehicle does this fit?
- Use ONLY With BORLA® Systems
- NOT recommended for Convertibles
- Fits vehicles with or without Active Valve Exhaust
- This Resonator contains an internal H-Pipe
Part# 60662 What vehicle does this fit?
- Contains SwitchFire™ technology
- Designed to replace the O.E. resonator ONLY
- Part is 33.2" Long x 7.1" Wide x 5.5" High
- Inlets 2.25" O.D., Middle Pipes 2" O.D., Outlets 2.5" I.D. Outlets are angled outward slightly.
Part# 60666 What vehicle does this fit?
- This optional Resonator is used when additional sound reduction is desired
- Adding this Resonator to these systems will achieve the Touring sound level
- It is designed to be used with BORLA® Cat-Back™ systems
- It is NOT designed to be used with 140597 or the original equipment exhaust system
- 3" diameter inlet and outlet
Part# 60667 What vehicle does this fit?
- Installation REQUIRES cutting the Original Equipment front pipe
- Designed to dampen the sound of systems 140752, 14752BC, 140753, 140753BC, 140758, and 140758BC
- 3" I.D. inlet and outlet, 18.875" overall length
- NOT designed to work with competitors or Original Equipment systems
Part# 60674 What vehicle does this fit?
- Use this Muffler to change system 140756 from an ATAK® sound level to a S-Type sound level
- 3" diameter inlets and outlets
- Use ONLY with BORLA® systems
Part# 60675 What vehicle does this fit?
- Use this Muffler to change system 140755 from a S-Type sound level to an ATAK® sound level
- 3" diameter inlets and outlets
- Use ONLY with BORLA® systems
Part# 60679 What vehicle does this fit?
- Can be used in select BORLA® GM truck ATAK® sound level systems to attain the S-Type sound level
Part# 60680 What vehicle does this fit?
- Can be used in select BORLA® GM truck S-Type sound level systems to attain the ATAK® sound level
- Features Polyphonic Harmonizer technology
Part# 60690 What vehicle does this fit?
- Use with Axle-Back System 11961 to create a Cat-Back™ system
- Use ONLY with BORLA® systems
- 2" diameter system
Part# 60691 What vehicle does this fit?
- Adapts BORLA® systems 140798, 140798BC, 140843, & 140843BC to Ext. Cab w/Short Bed (6' 9") 148" WB
- EXCEPT Vehicles with Dual Rear Wheels
- Includes 1) 3.5" clamp
- 3.5" ID Inlet, 3.5" OD Outlet, 8.5" Long
Part# 60692 What vehicle does this fit?
- Adapts BORLA® systems 140798, 140798BC, 140843, & 140843BC to Ext. Cab w/Std. Bed (8') 164" WB
- EXCEPT Vehicles with Dual Rear Wheels
- Includes 1) 3.5" clamp
- 3.5" ID Inlet, 3.5" OD Outlet, 24.5" Long
Part# 60693 What vehicle does this fit?
- Adapts BORLA® systems 140798, 140798BC, 140843, & 140843BC to Crew Cab w/Standard Bed (8') 176" WB
- EXCEPT Vehicles with Dual Rear Wheels
- Includes 1) 3.5" clamp
- 3.5" ID Inlet, 3.5" OD Outlet, 36.5" Long
Part# 60694 What vehicle does this fit?
- Use with BORLA® ATAK® systems 140792 and 140792BC to the S-Type sound level
Part# 60695 What vehicle does this fit?
- Use with BORLA® S-Type systems 140791 and 140791BC to the ATAK® sound level
Part# 60698 What vehicle does this fit?
- Fits Wrangler JL, JLU and Gladiator JT models
- Installation REQUIRES cutting the Original Equipment system
- The 60698 Loop Delete Pipe provides more space underneath your Wrangler JL/ JLU or Gladiator JT
Part# 60700 What vehicle does this fit?
- Converts the BORLA® dual side exit system to a high clearance Climber system
- Does NOT fit O.E. or other exhaust systems
Part# 60701 What vehicle does this fit?
- Converts the BORLA® high clearance Climber system to a side exit with two outlets
- Does NOT fit O.E. or other exhaust systems
Part# 60701CB What vehicle does this fit?
- Converts the BORLA® high clearance Climber system to a side exit with two outlets
- Does NOT fit O.E. or other exhaust systems
- Entire tip assembly is coated black with high temperature finish
Part# 60705 What vehicle does this fit?
- This X-Pipe and Connection Pipe fits vehicles with and without Active Valve Exhaust
- Use ONLY with BORLA® Axle-Back systems
Part# 60706 What vehicle does this fit?
- Adapts BORLA® 147.4" Wheelbase systems to Crew Cab with Standard Bed (6' 7") 157" Wheelbase vehicles
- 3.5" ID inlet, 3.5" OD outlet, 12" long
- 1) 3.5" clamp included
- EXCEPT ZR2 & AT4X models
Part# 60708 What vehicle does this fit?
- EXCEPT ZR2 & AT4X models
- Adapts BORLA® 147.4" Wheelbase systems to Crew Cab with Standard Bed (6' 7") 157" Wheelbase vehicle
- 3" ID inlet, 3" OD outlet, 12" long
- 1) 3" clamp included
Part# 621104 What vehicle does this fit?
- X-Pipes increase performance and improve sound
- Clamps NOT included
- Use 18325, 1" wide band clamps on notched connections
- Use 18004, 3" wide band clamps on un-notched connections